COMMENT ⊗   VALID 00004 PAGES
C REC  PAGE   DESCRIPTION
C00001 00001
C00002 00002	TEST2 is a quick kludge that was written to test the Grinnell when
C00003 00003	Summary of commands by function:
C00004 00004	Complete list of commands:
C00007 ENDMK
C⊗;
TEST2 is a quick kludge that was written to test the Grinnell when
it first rolled in the door.  Unfortunately, since there were SO
many problems with the Grinnell, it evolved into sort of a hodge-podge
of little routines to deal with the Grinnell.
Summary of commands by function:

Arbitrary commands
	o
Cursor
	k,kloop,move
Digitizer
	d
Image analyzer
	a,g
Image processor
	ipcc,ipcm,ipcs,ipcw
Internal tests
	i,t,t0,t1,t2,t3
Lookup tables
	b,kludge,m,mapin,out,rl,s
Memory
	p,rm,rmset
Picture display
	c,ck,e,fill,l,pw,r,rect,set,w
Picture readback
	bump,loopp,looprp,pr or ;,uset,u
Zoom/pan
	z
Complete list of commands:

a	Test max min logic of analyzer
b	Load lookup table to view one bit
bump	Control repetitive packed readback test
c	Checkerboard pattern
ck	Clear all channels, make drk bkg, draw checkerboard
d	Digitize
e	Erase current channel
fill    fill enabled channels in packed mode
g	Graph intensity distribution
i	Select the internal tests, but don't run any
ipcc	IPC control
ipcm	Set IPC control mode
ipcs	Switch inputs to ipc lookup tables
ipcw	Cause ipc to write into memory
kludge	Test bit map flaw
loopp	Do a packed read 101 times
looprp	Do a packed read with bytes reveresed 101 times
k	Read back cursor registers
kloop	Repeat readback of cursor registers until FUNA and FUNB both set
l	Load channel and subchannel
m	Load lookup table to view LSBs
mapin	Read back lookup table
move	Move cursor
o	Output an octal instruction
out	Change output from look up tables
p	Test individual bit planes
pr or ;	Do a packed read
pw	Do a packed write
q	Quit
r	Reverse checkerboard patten
rect    use rectangular update for output
rl	Test lookup table with random data
rm	Test selected channel
rmset	Set parameters for memory test
s	Set inputs to video lookup tables
set	Load several channels and subchannels
t	Run the four internal tests
t0,t1,t2,t3  Run one of the internal tests
uset	Set parameters for u command
u	Do an unpacked read
w	Do LWM instruction
z	Check zoom and pan
?	Print help message
!	Print commands, listed by unit affected